Home / Solutions / Volume Correctors (EVC)

Authorised representative of ELGAS s.r.o. · since 2008

Electronic volume correctors

ESCOM has been an authorised representative of ELGAS s.r.o. since 2008. We supply, install, commission and service ELGAS's 4th-generation ELCOR family for natural gas metering points.

Electronic volume correctors
Image: ELCORplus · ELGAS s.r.o.
Featured

ELCORplus

A compact electronic volume corrector that combines metrological measurement, a communication unit and telemetry in one device. It converts gas volume from operating to base conditions using the equation of state, and can also work as a universal datalogger for station monitoring.

Technical values are taken from the manufacturer's published documents and may vary with the selected options.

Channels
Single- or dual-channel EVC, optional non-metrological channel
Sensors
Up to 6 digital pressure / temperature transducers
Inputs
Up to 10 digital inputs (LF, HF, binary), up to 6 analogue 4-20 mA inputs (optional)
Outputs
Up to 4 digital outputs, up to 4 analogue 4-20 mA outputs (optional)
Meter / encoder
LF (reed, Wiegand), HF pulses; NAMUR, SCR/SCR+ and ELGAS encoders
Communication
Two field-replaceable modems: 2G, 4G LTE Cat1, LTE-M · RS232/RS485 · optical IEC 62056-21
Power
Battery operation (up to 18 years in defined conditions), optional solar or mains supply
Approvals
MID 2014/32/EU Type 1 (max. error 0.5%, typical 0.15%) · ATEX Zone 0, 1, 2 · dedicated Zone 2 version
Archives and display
11 archives covering years of data · backlit graphic LCD, 6-key capacitive keypad

ELCOR family and companion products

ELCOR

ELCOR

Simple, compact single-channel battery-powered corrector. Optional modem and datalogger, IP66.

ELCORlite

ELCORlite

The smallest model of the ELCOR family. Battery powered, optional field-replaceable modem, IP66.

ELCORplus Zone 2

Modular ELCORplus version certified for Zone 2 areas only.

picoELCOR-2

Diaphragm gas meter with integrated PTZ conversion and electronic index: G10, G16, G25. MID and ATEX approved.

DATCOM

Datalogger series for telemetry projects, built on the same hardware and firmware as the EVCs.

COMPASS

Windows service software for configuration, data reading, archive viewing and export.

What ESCOM does

  • Selection of the right model and options for each metering point
  • Field installation, wiring and commissioning
  • Parametrisation with COMPASS and remote reading set-up
  • Replacement of older ELCOR-2, MiniELCOR and MaxiELCOR units with ELCORplus
  • On-site service, fault finding and spare parts
  • Integration with SCADA and data acquisition systems